LED WATERPROOF BATTENS HFW-D T8 G13 BASE

EMERGENCY LIGHT

Features

  • Suitable for HLL (external driver) T8 G13 base LED lamps
  • LED drivers included for HLL T8 LED lamps
  • Various choices for different series of LED lamps
  • Available in single and double lamp versions
  • Ingress protection rating: IP65
  • Batteries with 2 or 3 hours options

Electrical Characteristics

See details information below:

Constructions

Body White powered coated sheet body
Lamp holder BJB, flame retardant grade
Wires UL approved, 105°C
Terminal block BJB, flame retardant grade

LED Drivers

The driver is AC and DC LED drivers built into one single unit.

With the internal micro-processor, the whole system is software controlled. These include battery charging, discharge discharging, system changeover, fault protections, LED indications and infrared remote control.

The improves system reliability and makes the system smarter for the whole operations.

The drivers also have buit-in active power factor correction with very low harmonic distortion. Protections with over-current, short-ciruict and open-circuit are provided with automatic restart for ease of use.

Five steps dimming is provided via the infrared remote controller.

LED Indications

The infrared remote control makes battery change-over testing is easier with just a press on the controller. It also provide 5-steps of dimming control for normal AC operation.

green-led-on-off Battery Charging
green-led-on-on Battery Full
red-led-on-on Battery Discharging
red-led-on-off System Errors

Remote Control

The infra-red remote control makes battery change-over testing is easier with just a press on the controller. It also provide 5-steps of dimming control for normal AC operation.

Dimensions

Compliances

EN 61347-2-1 Lamp controlgear. Particular requirements for starting devices (other than glow starters)

EN 61347-2-13 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

EN 62384 DC or AC supplied electronic control gear for LED modules. Performance requirements

EN 60598-1 Luminaires. General requirements and tests

EN 60598-2-22 Luminaires. Particular requirements. Luminaires for emergency lighting

EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN 61000-3-2 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

EN 61000-3-3 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection

EN 61547 Equipment for general lighting purposes. EMC immunity requirements

FSD Circular Letter No. 1/2006: PPA-104(A) 4th Rev Fire Safety Standards for Emergency Lighting

Product Models

Model Lamp
Type
Lamp
Count
Length
(mm)
HFW-D8-12L# T8 G13 600mm 1 660
HFW-D8-14L# T8 G13 1200mm 1 1276
HFW-D8-15L# T8 G13 1500mm 1 1576
HFW-D8-22L# T8 G13 600mm 2 660
HFW-D8-24L# T8 G13 1200mm 2 1276
HFW-D8-25L# T8 G13 1500mm 2 1576

※ Replace “#” with “E2” or “E3”  for 2-hr or 3-hr emergency lighting option
※ Add suffix “F” for optional fused terminal blocks