HLT Constant Current LED Driver

Features

  • Single stage constant current LED driver
  • Active power factor correction
  • Low total current harmonic distortion
  • Constant light output over wide mains voltage range (100 – 265VAC)
  • Mains over-voltage protection for 320VAC, 1 hour
  • Mains under-voltage protection
  • Open circuit protection
  • Short circuit protection
  • Over-temperature protection
  • All protections are auto restart

Electrical Characteristics

Rated supply voltage 220 VAC ±10%
Supply frequency 50-60 Hz
Operation life > 50,000 Hrs
Lamp switching cycles 100,000
Ambient temperature (ta) -20 … +50°C
Dimensions (L x W X H) 164 x 40 x 30 mm
Mounting hole distance 156 mm

%

Power Factor

%

THD

Years Warranty

Hours of Life

Active Power Factor Correction

With the internal active harmonic filter, power factor of Hoye electronic ballasts is higher than 98% and total harmonic distortion is reduced to less than 10%, which is far beyond the limits of IEC 61000-3-2.

Electromagnetic Interference

The electromagnetic interference of Hoye electronic ballasts is further suppressed with the improved circuit design technologies. EMC performance is superior to most other products in the market.

Input Regulation

With the internal voltage regulation circuit, the luminous flux is unaffected by mains voltage. It provides a comfortable and stable light source for the environment.

Dimensions & Wiring

Compliances

EN 61347-2-1 Lamp controlgear. Particular requirements for starting devices (other than glow starters)

EN 61347-2-3 Lamp control gear – Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps

EN 60929 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps – Performance requirements

EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN 61000-3-2 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

EN 61000-3-3 Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection

EN 61547 Equipment for general lighting purposes. EMC immunity requirements

Product Models

Model Circuit
Power (W)
Lamp
Power (W)
PF
(%)
THD
(%)
tc
(°C)
Weight
(g)
HLT-120-42 5.9 4.5 93 15 65
HLT-220-42 9.6 8.0 96 15 65
HLT-225-42 9.9 9.0 96 15 65
HLT-300-42 13.3 10.0 96 15 65
HLT-400-42 16.3 14.0 96 15 65
HLT-450-42 19.7 18.0 96 15 65
HLT-550-42 25.2 20.0 96 15 65
HLT-600-42 26.6 24.0 96 15 65
HLT-700-42 28.6 28.0 96 15 65