LED WATERPROOF BATTEN HWD SERIES
MOTION SENSOR
Features
- Replaceable LED module
- LED drivers included
- Available in single and double lamp versions
- Built-in microwave motion sensor
- Ingress protection rating: IP65
Electrical Characteristics
| Rated supply voltage | 220-240 VAC ±10% |
| Lamp switching cycles | >200,000 |
| Ambient temperature (ta) | -20 … +50°C |
| Driver efficiency | up to 90% |
| Power factor | ≥95% |
| THD | <15% |
| CRI | >80 |
| Lumen maintenance (L70) | >35K Hrs |
LED Modules
- LED modules are mounted directly on metal plates. This provides better heat dissipation and lower LED junction temperature
- Higher efficiency due to removal of LED tube diffuser
- No blocking for human motion sensor.
LED Drivers
HLT series is the durable, high-performance LED drivers are specifically designed to work with Hoye LED modules, T8 lamps, LED spotlights and LED downlights.
The drivers have buit-in active power factor correction with very low harmonic distortion. Protections with over-current, short-ciruict and open-circuit are provided with automatic restart for ease of use.
Dimensions
Compliances
EN 61347-2-1 Lamp controlgear. Particular requirements for starting devices (other than glow starters)
EN 61347-2-13 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
EN 62384 DC or AC supplied electronic control gear for LED modules. Performance requirements
EN 60598-1 Luminaires. General requirements and tests
EN 60598-2-1 Luminaires. Particular requirements. Specification for fixed general purpose luminaires
EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
EN 61000-3-2 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
EN 61000-3-3 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
EN 61547 Equipment for general lighting purposes. EMC immunity requirements
Ordering Information
| Model | Lamp Count | Length (mm) |
|---|---|---|
| HFW-DM-12 | 1 | 660 |
| HFW-DM-14 | 1 | 1276 |
| HFW-DM-15 | 1 | 1576 |
| HFW-DM-22 | 2 | 1320 |
| HFW-DM-24 | 2 | 2552 |
| HFW-DM-25 | 2 | 3144 |
※ Add suffix “F” for optional fused terminal blocks